Science and Technology
publicado em 27/06/2013 às 13h00:00
   Dê o seu voto:

U.S. team creates microbattery able to carry small medical implants

New tool developed by 3D printing provide electricity for tiny devices inserted into the body, say researchers

 
font size
A-
A+

3-D printing now can be used to print lithium-ion microbatteries the size of a grain of sand. The printed microbatteries could supply electricity to tiny devices in fields from medicine to communications, including many that have lingered on lab benches for lack of a battery small enough to fit the device, yet providing enough stored energy to power it.

To make the microbatteries, a team based at Harvard University and the University of Illinois at Urbana-Champaign printed precisely interlaced stacks of tiny battery electrodes, each less than the diameter of a human hair.

" Not only did we demonstrate for the first time that we can 3-D-print a battery, we demonstrated it in the most rigorous way," said Jennifer Lewis, the senior author of the study, who is the Hansjörg Wyss Professor of Biologically Inspired Engineering at the Harvard School of Engineering and Applied Sciences (SEAS), and a core faculty member of the Wyss Institute for Biologically Inspired Engineering at Harvard University. Lewis co-led the project in her prior position at Illinois, in collaboration with Shen Dillon, a U. of I. professor of materials science and engineering.

The results will be published online on June 18 in the journal Advanced Materials.

In recent years engineers have invented many miniaturized devices, including medical implants, flying insect-like robots, and tiny cameras and microphones that fit on a pair of glasses. But often the batteries that power them are as large as or larger than the devices themselves which defeats the purpose of building small.

To get around this problem, manufacturers have traditionally deposited thin films of solid materials to build the electrodes. However, because of their ultra-thin design, these solid-state micro-batteries do not pack sufficient energy to power tomorrow' s miniaturized devices.

The scientists realized they could pack more energy if they could create stacks of tightly interlaced, ultrathin electrodes that were built out of plane. For this they turned to 3-D printing. 3-D printers follow instructions from three-dimensional computer drawings, depositing successive layers of material inks to build a physical object from the ground up, much like stacking a deck of cards one at a time. The technique is used in a range of fields, from producing crowns in dental labs to rapid prototyping of aerospace, automotive and consumer goods. Lewis' group has greatly expanded the capabilities of 3-D printing. They have designed a broad range of functional inks inks with useful chemical and electrical properties. And they have used those inks with their custom-built 3-D printers to create precise structures with the electronic, optical, mechanical or biologically relevant properties they want.

To print 3-D electrodes, Lewis' group first created and tested several specialized inks. Unlike the ink in an office inkjet printer, which comes out as droplets of liquid that wet the page, the inks developed for extrusion-based 3-D printing must fulfill two difficult requirements. They must exit fine nozzles like toothpaste from a tube, and they must immediately harden into their final form.

In this case, the inks also had to function as electrochemically active materials to create working anodes and cathodes, and they had to harden into layers that are as narrow as those produced by thin-film manufacturing methods. To accomplish these goals, the researchers created an ink for the anode with nanoparticles of one lithium metal oxide compound, and an ink for the cathode from nanoparticles of another. The printer deposited the inks onto the teeth of two gold combs, creating a tightly interlaced stack of anodes and cathodes. Then the researchers packaged the electrodes into a tiny container and filled it with an electrolyte solution to complete the battery.

Next, they measured how much energy could be packed into the tiny batteries, how much power they could deliver, and how long they held a charge. " The electrochemical performance is comparable to commercial batteries in terms of charge and discharge rate, cycle life and energy densities," Dillon said. " We' re just able to achieve this on a much smaller scale." Dillon also is affiliated with the Frederick Seitz Materials Research Laboratory and the Beckman Institute for Advanced Science and Technology at the U. of I.

" Jennifer' s innova

Source: UNIVERSIDADE DE ILLINOIS
   Palavras-chave:   Microbattery    Medical implants    3D Printing    University of Illinois    Jennifer Lewis   
  • Share this pageShare this page
  • Share this pageCorrect
  • ShareShare
  • AlertAlert
Reduced link: 
  • You are recommending this story: U.S. team creates microbattery able to carry small medical implants
  • Fill in the following form to send your recommendation to your friend:

  • You are suggesting a correction for this story: U.S. team creates microbattery able to carry small medical implants


Receba notícias do iSaúde no seu e-mail de acordo com os assuntos de seu interesse.
Seu nome:
Seu email:
Desejo receber um alerta com estes assuntos:
Microbattery    medical implants    3D Printing    University of Illinois    Jennifer Lewis   
Comments:
Comment
Leave your comment
Close
(Required fields are marked with an *)

(Your email address will never be published or shared.)

Enter the letters and numbers below and click in the button "send"

  • Twitter iSaúde
advertising
Informe Saúde printed version

Recommend the portal
Close [X]
  • You are recommending this story: http://www.isaude.net
  • Fill in the following form to send your recommendation to your friend:

RSS news from the portal  iSaúde.net
Get the newsletter of the portal  iSaúde.net
Recommend the portal iSaúde.net
News from  iSaúde.net in your blog or website.
Get news on the subject of your interest.
© 2000-2011 www.isaude.net Todos os direitos reservados.